Engineering and Workshop Technology

                                                Charcoal making Aim  :-                Making charcoal with the help of biomass. Requirments :-  Tin barrel , tin pipe , match box,  B io waste (5 kg) ,wheat power (500 gm) Procedure :-  W e take a tin barrel and we make holes   on tin barrel at the part of side surface at middle we put holes after that we put  bio waste in the barrel . We burn the bio waste in the barrel slowly slowly and we    cover the barrel with the help of  tin plate and put the tin pipe at the upper surface at the cap surface .We burn it for three hours  after extinguish fire we remove the charcoal in it and after some times we make a powder of charcoal and put atta for stickyness for giving shape also .we mix charcoal and aata  .And we put it in sunlight After then we give it shape like a ball,cube etc and do packing . Observation :-  1)When we burn it we should keep tin plate because if we not keep it ,  it will be burn fastly  2)  When we burn

Glass

                                      Bending machine Date:-18july 2017 Bending machine:- In bending machine we use to bend tin sheet.                                  And also we bend flat patti but we regular to                                   sue bending machine to bend tin sheet. Images:-

stool making October 10, 2017                                                   Stool making Aim:-Hand made stool Requirements:-Ply  wood, San Mick, nail's   process:-First l take a plywood and  cut it in to two pieces                         measure it by 3feet of width and height in to                                 same 3feet and cut it in to two pieces and at 1.6 on                     plywood cut a U shaped hole and fix both of them                       and at the top surface l take round faced                                       measured plywood and hammered it with                                     nail's and I designed it half heartcutted and apply it                   on the stool Conclusion:-I learned about how to make a innovative stool.

                                                  Stool making Aim:-Hand made stool Requirements:-Ply  wood, San Mick, nail's   process:-First l take a plywood and  cut it in to two pieces                         measure it by 3feet of width and height in to                                 same 3feet and cut it in to two pieces and at 1.6 on                     plywood cut a U shaped hole and fix both of them                       and at the top surface l take round faced                                       measured plywood and hammered it with                                     nail's and I designed it half heartcutted and apply it                   on the stool Conclusion:-I learned about how to make a innovative stool.

            Fixing sunmica on plywood Date:-30 august 2017 Aim:- fixing sunmica on plywood Requirements:- plywood, sunmica, nails, fevicol, stool, all carpentry work tools. Procedure:-make wooden box to fix sunmica.                    cut plywood to required size using saw                    cut sunmica to required size                    use fevicol to plywood and put the sunmica over it                    keep weight or small nail and abro tape to hold sunmica to plywood till it sticks.                     Observation:- care and tricks of cutting and handling sunmica.                        take care while cutting and handling plywood.                        tricks to hold sunmica with plywood. Result:-we see after some time the sunmica are perfect stick to plywood. Images:-